You’re probably unhappy about that, and you might not even have a particularly big home: basic routers typically struggle with range and can’t support lots of devices.
Even if your current router manages to provide a Wi-Fi signal in every room, the speeds are probably quite slow in those farthest away, and the signal almost certainly doesn’t cover any outdoor areas, such as a garden, or outbuildings such as a garage or shed.
Upgrading to a newer, better router is one option, but there’s now an alternative: mesh Wi-Fi routers.
They don’t replace your old router entirely: just the Wi-Fi part. You simply connect one of your new mesh Wi-Fi devices (variously called nodes, satellites, hubs and other things by different manufacturers) to your router and it works with the other units that came in the kit to cover your whole home with a fast, strong signal.
In smaller homes, including apartments, mesh Wi-Fi might not be required. You could save money by upgrading your old router, but if you want excellent Wi-Fi across your home and garden, then a mesh system is the answer.
So if you’re still struggling along with the Wi-Fi router you got years ago, a mesh Wi-Fi system will be a revelation. No more stuttering Zoom calls, no web pages loading really slowly and no buffering when streaming Netflix or YouTube videos.
If a mesh Wi-Fi systems sounds complicated, don’t worry. They’re really easy to install. You don’t have to change your internet provider, and you keep your old router. Ideally you should disable its Wi-Fi so it doesn’t interfere with the new network, but quite a few manufacturers now say you can simply leave it on if you want to.
The best news is that mesh Wi-Fi systems don’t have to cost a lot. Prices start from as little as $80/£70, but if you want the latest, fastest models, you’ll pay a lot more. What’s important is to match the speed of a mesh Wi-Fi system to your broadband speed. There’s no point in paying over the odds for one that delivers gigabit speeds if your broadband runs at only 70Mbps.
It’s also useful to know that Wi-Fi 5 systems aren’t necessarily slower than Wi-Fi 6 kits, even though many people assume they will be. Prices usually reflect the speeds you can expect.
Coverage isn’t always dependent on price. Mesh kits usually include two or three devices – called nodes – which communicate with each other wirelessly and provide a single Wi-Fi network over a much larger area than a single router can. Your devices will disconnect from one node and connect to a closer one as you move around your home.
So no matter whether you have a large single-storey home, such as a bungalow, or a town house with several floors, a mesh system will be a huge upgrade. And if you discover you need more mesh routers, you can usually buy them individually and add them to the system using the companion app on your phone.
Some mesh systems – such as the TP-Link Deco P9 – can even use your home’s mains wiring to talk to each other using powerline networking instead of Wi-Fi. This is useful if your home has very thick walls, or is constructed from materials which block Wi-Fi (such as metal). Or, if your home is wired for Ethernet, a lot of mesh systems let you connect nodes together using network cables. This is called Ethernet backhaul, and it allows you to place them further apart, even in an outbuilding such as a garage or shed.
Here we’ve reviewed and ranked the best mesh Wi-Fi 5 and 6 systems for all budgets.
Mesh Wi-Fi buying guide: what to look for
Mesh Wi-Fi is a smart solution, but there may well be other ways to speed up your home network.
Good speeds and coverage Competitively priced Ethernet backhaul supported
No dedicated wireless backhaul Basic parental controls only
It isn’t the cheapest Wi-Fi 6 mesh system you can buy, but you wouldn’t expect it to be considering the features and performance on offer, which include four Ethernet ports on each unit.
The best speeds require you to have up-to-date devices (such as phones and laptops), but don’t forget that you won’t get much of a benefit from speeds that are faster than your broadband connection.
But for a price that’s a lot less than most Wi-Fi 6E mesh systems, it hits that sweet spot between cost and value. Available in packs of 1, 2 or 3 depending on the size of your home.
Uses powerline networking to connect the units Good parental controls
Not the fastest speeds
It’s a dual-band Wi-Fi 5 system, but technically it’s tri-band because it can use Powerline for ‘backhaul’, which means the mesh units can talk to each other even if they’re further apart than Wi-Fi allows.
While it was originally available only in a set of three offering up to 6000 square feet of coverage, TP-Link has since launched a two-unit set ideal for smaller homes, and it’s great value.
If you want a mesh Wi-Fi system that doesn’t depend on Wi-Fi for the units to communicate with each other, the Deco P9 is ideal.
Great speeds User-friendly app
No Ethernet ports on satellites Security features require subscription
The Eero 6 has a Zigbee hub built in, which could be handy if you have Philips Hue or other Zigbee-based smart home devices.
Note that the satellites in the kit aren’t identical to the main router: they don’t have any Ethernet ports (unlike the original Eero) which could be a deal-breaker if you need to connect a PC or any other device that doesn’t have Wi-Fi.
Assuming that’s not a problem, the Eero 6 is just as impressive as the original, with a great app and easy setup. Of course, performance is also excellent, though you’ll need devices with Wi-Fi 6 to get the best speeds from the system.
The original Wi-Fi 5-based Eero system is still on sale and is cheaper, and a good alternative if you don’t need Wi-Fi 6 yet – or Zigbee.
If there’s one drawback, it’s the fact some features are locked away behind a subscription. On most rival systems there’s no subscription to worry about.
Two Gigabit Ethernet ports per node Affordable
Basic parental controls
Via the app you can manage the network, enable guest Wi-Fi and create basic access rules to limit internet time for specific devices.
It provides a reliable wireless network with decent speeds that should satisfy most families. And each of the units has two Gigabit Ethernet ports for connecting devices that don’t have Wi-Fi.
It doesn’t have any built in ‘smart hub’ like some mesh kits, meaning you can’t use it instead of a dedicated hub or bridge to connect Philips Hue bulbs or other Zigbee or Z-Wave devices.
Costs less than many single routers
Basic app Not the fastest speeds
As you’d expect, it can’t match the performance of more expensive rivals, but it still does a great job of delivering a strong Wi-Fi connection and eliminating dead zones around your home. Obviously, it doesn’t support Wi-Fi 6, but instead Wi-Fi 5, which is still perfectly good for streaming video, playing games and other internet activities.
That makes it a terrific bargain if you just need to provide a good internet connection around an average-size home, rather than have the ultimate Wi-Fi speeds.
Slick hardware and app Google Assistant built in
Expensive Not Wi-Fi 6
If there’s a disappointment it’s that the kit doesn’t support the latest Wi-Fi 6 standard, but Nest WiFi is plenty fast enough for the average home and will improve signal around even smaller house vs a regular router.
Of course, you also get great Google software which makes the whole process simple and easy to use. Not only it is a breeze to get set up, but the features are accessible and helpful including a guest network, priority devices and parental controls. You can even pause the network with your voice via the Google Assistant.
Compact units 2 Ethernet ports per router
Slower than Eero 6
Wireless speeds are respectable, though if you want something a little faster, then a tri-band Eero Pro system might be just the ticket.
Gamers, home office workers or anyone with a lot of devices that work better with a wired connection will find the two Ethernet ports per Eero very useful (and you can add more with an inexpensive Ethernet hub). Plus, most people will be happy with the wide-ranging wireless coverage the system delivers.
Powerline & Wi-Fi Easy to expand
Expensive App could be better
Unlike the previous Magic 2 kit, each adapter in the Mesh Wi-Fi 2 kit is identical, and all have Wi-Fi.
But they are essentially the same as the Magic 2 units, and you can use individual Magic 2 adapters to expand the system if you need more than three Wi-Fi hotspots.
You don’t even lose a mains socket as each device has a pass-through socket as well as two Ethernet ports for connecting PCs or other devices without Wi-Fi.
Despite not offering Wi-Fi 6, this kit will cost a similar amount to those that do. We’re not the biggest fans of the app, either, as it isn’t particularly nice to use and doesn’t offer all that many features. However, if you’re after a mesh system for a larger home, this one really delivers.
Good coverage Slick app
Subscription required for some key features Expensive
The app is great, but Eero puts too many features behind a paywall and doesn’t include enough ‘pro’ features.
If you don’t mind the cost, have lots of Wi-Fi 6 devices already and don’t need the full Gigabit speeds, the Eero Pro 6 is a great mesh system. But for most people right now, the extra cost isn’t worth it.
You then place the second (and third if relevant) mesh device somewhere else in your house, typically on another floor.
The devices all talk to each other and create a single Wi-Fi network that’s both strong and fast across your entire home.
The only reason you may find you still don’t get whole-home coverage is if a) you have an extremely large home or b) your home has very thick stone, brick or concrete walls.
Check out our roundup of the best powerline adapters for more, but bear in mind that not all powerline kits include Wi-Fi, so cheaper kits will only connect gadgets that have an Ethernet port.
Some apps also let you ‘pause’ the Wi-Fi network but the best let you stop Wi-Fi on certain devices, so you could prevent your kids watching more YouTube videos, for example.
Others include parental controls or scheduling so Wi-Fi is only available at certain times or to certain devices, which is great for preventing kids having too much screen time.
It also reduces the chances of running into problems when playing online games or hosting your own game server.
If you don’t use bridge mode you might find you can’t do things such as print from a PC that’s connected to your exiting router to a wireless printer.
The disadvantage of using bridge mode is that it tends to prevent you from using many of the mesh system’s features such as parental controls, pausing Wi-Fi and others.
Jim has been testing and reviewing products for over 20 years. His main beats include VPN services and antivirus. He also covers smart home tech, mesh Wi-Fi and electric bikes.
